Home » Configs » MRTG Sidewinder Firewall

MRTG Sidewinder Firewall

mrtg MRTG Sidewinder Firewall

MRTG Sidewinder Firewall

Sidewinder OIDs:

OID
CPU %: 1.3.6.1.2.1.25.3.3.1.2.769
bge0 IN: 1.3.6.1.2.1.2.2.1.10.1
bge0 OUT: 1.3.6.1.2.1.2.2.1.16.1
bge1 IN: 1.3.6.1.2.1.2.2.1.10.2
bge1 OUT: 1.3.6.1.2.1.2.2.1.16.2
em0 IN: 1.3.6.1.2.1.2.2.1.10.3
em0 Out: 1.3.6.1.2.1.2.2.1.16.3
em1 IN: 1.3.6.1.2.1.2.2.1.10.4
em1 OUT: 1.3.6.1.2.1.2.2.1.16.4
em2 IN: 1.3.6.1.2.1.2.2.1.10.5
em2 OUT: 1.3.6.1.2.1.2.2.1.16.5
em3 IN: 1.3.6.1.2.1.2.2.1.10.6
em3 OUT: 1.3.6.1.2.1.2.2.1.16.6
em4 IN: 1.3.6.1.2.1.2.2.1.10.7
em4 OUT: 1.3.6.1.2.1.2.2.1.16.7
em5 IN: 1.3.6.1.2.1.2.2.1.10.8
em5 OUT: 1.3.6.1.2.1.2.2.1.16.8
em6 IN: 1.3.6.1.2.1.2.2.1.10.9
em6 OUT: 1.3.6.1.2.1.2.2.1.16.9
em7 IN: 1.3.6.1.2.1.2.2.1.10.10
em7 OUT: 1.3.6.1.2.1.2.2.1.16.10
em10 IN: 1.3.6.1.2.1.2.2.1.10.13
em10 OUT: 1.3.6.1.2.1.2.2.1.16.13

MRTG cfgmaker command line (note: I had to compile the newest stable version of mrtg 2.16.4 for snmpv3 to work properly):
/usr/local/mrtg-2/bin/cfgmaker –ifref=name –show-op-down –global ‘WorkDir: /var/www/mrtg/HOSTNAME1’ -global ‘Options[_]: bits,growright’ –enablesnmpv3 –snmp-options=:::::3 –username=USERNAME1 –authprotocol=MD5 –authpassword=PASSWORD1 –privpassword=PASSWORD1 –privprotocol=des –output /opt/mrtg/HOSTNAME1.cfg –contextengineid=0 192.168.1.1

snmpwalk command line to walk the Sidewinder firewalls (note: sidewinders use md5 and des for snmpv3):
snmpwalk -v 3 -u USERNAME1 -l authPriv -X PASSWORD1 -a MD5 -A PASSWORD1 192.168.1.1

Snippets of mrtg cfg files for a Sidewinder firewall:
### CPU Utilization (I manually added this since cfgmaker didn’t pick up the CPU)

Title[192.168.1.1_cpu]: CPU Utilization
MaxBytes[192.168.1.1_cpu]: 100
Options[192.168.1.1_cpu]: gauge, nopercent, absolute, growright
Target[192.168.1.1_cpu]: 1.3.6.1.2.1.25.3.3.1.2.769&1.3.6.1.2.1.25.3.3.1.2.769:public@192.168.1.1
SnmpOptions[192.168.1.1_3]: privpassword=>’PASSWORD1′,authpassword=>’PASSWORD1′,authprotocol=>’md5′,privprotocol=>’des’,username=>’USERNAME1′
PageTop[192.168.1.1_cpu]: <h1>CPU Utilization</h1>
YLegend[192.168.1.1_cpu]: CPU Percent
ShortLegend[192.168.1.1_cpu]: percent
WithPeak[192.168.1.1_cpu]: ymwd

### CFGMAKER picked the interfaces up fine, but I noticed oddness when mrtg polled them, so I specified the OID for the interface in the 2nd “Target line” after commenting out the 1st.
### Interface 3 >> Descr: ’em0′ | Name: ” | Ip: ‘192.168.1.1’ | Eth: ’30-78-30-30-30-34-32-33-34-35-64-38-36-30′ ###
#
#Target[192.168.1.1_3]: 3:public@192.168.1.1:::::3 #Commented because it did NOT work, speficied OIDs in new TARGET Line below
Target[192.168.1.1_3]: 1.3.6.1.2.1.2.2.1.10.3&1.3.6.1.2.1.2.2.1.16.3:public@192.168.1.1:::::3
SnmpOptions[192.168.1.1_3]: privpassword=>’PASSWORD1′,authpassword=>’PASSWORD1′,authprotocol=>’md5′,privprotocol=>’des’,username=>’USERNAME1′
noHC[192.168.1.1_3]: yes
SetEnv[192.168.1.1_3]: MRTG_INT_IP=”192.168.1.1″ MRTG_INT_DESCR=”em0″
MaxBytes[192.168.1.1_3]: 12500000
Title[192.168.1.1_3]: em0 – internet (192.168.1.1)
PageTop[192.168.1.1_3]: <h1>em0 – internet (192.168.1.1)</h1>

System: HOSTNAME.domain.com
Maintainer: “firewall group”
Description: em0
ifType: ethernetCsmacd (6)
ifName:
Max Speed: 1000.0 Mbits/s
Ip: 192.168.1.1 ()

As an Amazon Associate I earn from qualifying purchases. Read our Privacy Policy for more info.

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.